Universal 720P Backup Camera
by Litillbuly
Independent guide. Not the official Litillbuly site.
A license-plate-mount backup camera with a 140° field of view, IP67 water rating and night vision, wired to a head unit through an RCA connector.
Today's price and delivery date are shown on Amazon.
Check price on Amazon Read customer reviews on AmazonAs an Amazon Associate I earn from qualifying purchases.
Is it the right one for you?
Choose it if
- You already have a head unit or monitor with an RCA video input and want to add a rear view.
- You drive a Jeep, SUV, RV or van on a 12V–24V system and want a camera that is not tied to one model year.
- You want to mount at the license plate position without changing how the rear of the vehicle looks, as the maker describes it.
Pick another if
- You want a screen and camera bought together for a Toyota Tundra or Sequoia → Tundra/Sequoia 10" + Camera Bundle
- You want a stereo and camera bundle for a 2007-11 Camry → Camry 2007-11 9" + Camera Bundle
- You want a BMW E-Series head unit that comes with a camera → BMW E-Series 8.8" + Camera Bundle
Key numbers
Before you buy
- Check that your monitor or head unit has an RCA video input, since the camera uses an RCA connector.
- Confirm your vehicle runs on 12V–24V. The maker lists the camera for that range.
- The rear cable is about 19.68 ft. Measure the run from the plate to the screen along the route you plan to use, especially on an RV or van.
- The camera is a surface-mount unit that goes at the license plate position. Look at your plate area to see that it has room for the 5×3×1.8 inch body.
- Automatic switching to the camera when you shift into reverse depends on wiring the trigger to the reverse light circuit during install.
- The maker does not state the weight, and no kit contents are listed, so plan to source any extra wiring or mounting hardware yourself.
- Resolution figures vary in the maker's data. The name says 720P, while another line shows 2160p, so treat 720P as the figure to expect.
Why it works
The maker gives a 140° view, with the vertical angle adjustable so you can aim the camera at the spot you want to see.
The IP67 rating covers rain and car washes, which matters for a camera mounted at the plate where road spray lands.
The maker says the night vision function gives a usable view of what is behind you in daylight and after dark.
An RCA connector lets it feed a compatible monitor or head unit with a matching input.
About 19.68 ft of cable gives reach toward the front of larger vehicles such as vans and RVs.
It surface-mounts at the existing plate position, so the maker says the original look of the vehicle stays as it is.
Specifications
| Dimensions | 5×3×1.8 inches |
|---|---|
| Field of view | 140 degrees |
| Water rating | IP67 |
| Voltage | 12V–24V |
| Connector | RCA |
| Sensor | CMOS, 1/3 inch |
| Rear cable | About 19.68 ft |
| Installation | Surface mount |
Questions & answers
Yes, it is listed for 12V–24V vehicles, including Jeeps, SUVs, RVs and vans.
Is it waterproof?Yes, it carries an IP67 rating, which the maker ties to rain and car washes.
Does it have night vision?Yes, it has a night vision function for seeing behind the vehicle in low light.
How long is the cable?The rear cable is about 19.68 ft long, per the maker.
What connector does it use?It uses an RCA connector, so your monitor or head unit needs a compatible video input.
Where does it mount?It mounts on the surface at the existing license plate location without altering the vehicle's structure, according to the maker.
