
8FT Tube 75W 6000K R17D (12-Pack)
by ELEKICO
Independent guide. Not the official ELEKICO site.
A 12-pack of 8-foot V-shaped LED tubes with an R17D base that replace fluorescent tubes in T8, T10 and T12 fixtures after a ballast bypass.
Today's price and delivery date are shown on Amazon.
Check price on Amazon Read customer reviews on AmazonAs an Amazon Associate I earn from qualifying purchases.
Is it the right one for you?
Choose it if
- You are replacing 8-foot fluorescent tubes in T8, T10 or T12 fixtures and are ready to bypass the ballast and starter.
- You want cool white light at 6000K for a garage, workshop or warehouse, and you do not need the warmer 5000K of the other tube pack.
- You are outfitting many fixtures at once: the pack holds 12 tubes at 9500 lumens each.
- You want the dual-row V shape, which the maker says spreads light over 270 degrees.
Pick another if
- You prefer 5000K neutral light in an 8ft tube → 8FT Tube 75W 5000K (10-Pack)
- You want a plug-in 8ft shop light fixture instead of a tube that needs rewiring → 8FT Shop Light 100W (12-Pack)
- Your ceiling is high and you need a UFO high bay fixture → UFO High Bay 150W (6-Pack)
Key numbers
Before you buy
- Check that your fixture takes an 8-foot tube with an R17D base. The tube is 96 inches long.
- The tube is powered from both ends. It does not work in a fixture with a ballast or starter, so you must remove or bypass them first.
- Bypassing the ballast means wiring the fixture directly. If you are not comfortable with that, have an electrician do it.
- The maker advises installing the tubes away from radios and remote control door openers, which can cause EMI.
- The tube is rated for 110 volts at 60 Hz and for indoor use only.
- The pack contains the 12 tubes only. Fixtures and wiring parts are not included.
- The maker states 6000K, a cool white. Confirm that color suits the space before ordering 12.
Why it works
Two rows of LEDs sit in a V shape. The maker says this gives 270-degree lighting and about 40% more lumens than standard flat LED tubes.
Power enters at both ends of the tube, so the old ballast and starter must come out of the circuit. The tube then runs directly from line voltage.
The base and length match 8-foot fluorescent tubes. The maker lists compatibility with T8, T10 and T12 fixtures.
The maker uses aluminum for heat dissipation, which it ties to the double-row design as well.
The clear cover is polycarbonate, which the maker describes as shatter resistant.
Each tube draws 75W and puts out 9500 lumens. The maker calls it a 100–150 watt equivalent and claims savings of 50%–66% on electricity.
Specifications
| Length | 8 ft (96 in) |
|---|---|
| Power | 75W per tube |
| Light output | 9500 lm |
| Color temperature | 6000K, cool white |
| Base | R17D |
| Voltage | 110V, 60 Hz |
| Warranty | 5 years (maker) |
| Pack size | 12 tubes |
What's in the box
- 12 LED light tubes
Questions & answers
Yes, the ballast and starter must be removed or bypassed before installing. The tube is powered from both ends and does not work in a fixture that still has a ballast.
Which fixtures does it fit?It fits 8-foot fixtures with an R17D base. The maker lists T8, T10 and T12 fixtures as compatible.
Can I use it outdoors?No, it is listed for indoor use only. The maker suggests garages, workshops, warehouses, shops and offices.
How bright is each tube?Each tube is rated at 9500 lumens on 75W. The maker uses 6000K, which is a cool white.
What warranty and lifespan does the maker state?The maker states a 5-year warranty and a lifetime of more than 50,000 hours. Another spec line gives an operating life of 15000 hours, so treat the lifespan figure with care.
How many tubes come in the pack?The pack has 12 LED tubes.
Compare ELEKICO models
8FT Tube 75W 6000K R17D (12-Pack) | 8FT Tube 75W 5000K (10-Pack) | |
| Check price on Amazon | Check price on AmazonDetails |

